"New Hydroxy Dyer 2020" New compact size, easier to fit under the hood. 3" clear acrylic tube filter housing. 3.5 dia. x 5.5" tall. Placed above after your bubbling water tank to your air intake. It dries the gas, keeps the static charge. It takes out all (NaOH or KOH electrolyte) aerosol vapor. Hydroxy gas has more combustion power when dry. Also one more step in protecting your engine from electrolyte vapor. Comes with a "one micron" air filter. Comes with black nylon cable ties. Two 1/4" ID hose fitting nylon threaded hose fittings, one elbow and one straight, with 1/4" NPT threaded inlet & outlet, in the lid. Can get 3/8" ID hose fittings if you ask us, other wise we use 1/4" ID hose fittings. We want the gs to travel faster, sooner to the air intake, so a smaller hose size is used up to 7.0L engines. For those wanting extra protection from electrolyte vapor. Will also act as a safety anti-spark arrestor. The bottom of the filter will capture the moisture/condensation, and lets your dry hydroxy gas flow quite easily through the filter. Will stop a flashback. We mount this dryer after and above the bubbler or bubbling/scrubing water tank and before your air filter box. We always do the tier build, as the condensation dripps back to the water tank and no maintance is needed. Also good for installs that not do through your car's air filter, but rather to some port in your fuel injection system or carburetor and you want that air filter protection. Extra 5" filters are available. • Hydroxy Air Dryer Install instructions
Compare photos of the new dryer and the former 5" Dryer.
* Can also be made into a simple "bubbler" by adding a few plumbing parts. You reverse the direction of the flow and marine goop in a 4" piece of 1/2" plumbers pex tubing into the center fitting in side the cap, to the OUT and the IN become the out gas flow direction. ( Soon to be available as a bubbler kit)
* Also note the 5" white poly filter is sold in all hardware stores as 10" filters, if you cut them exaclty in 1/2 and you get two 5" filters ( 4.75") they will fit the container perfectly.
