1.5 Quart Water Tank

  • Shipping Weight: 2.5lbs
  • Units in Stock: 14

Starting at: $26.50

1.5 Quart Water Tank size = 3.5" x 5.5", 6" tall, 2 mount holes1.5 Quart Water Tank, lye proof plastic, we call a scrubber, where the incoming hho gas bubbles inside this tank and scrubs off the NaOH or KOH from the gas.
Electrolyte/Water Re-circulating Bubbler Tank, Three sizes to choose from : 1.5 quart or 2 quart or 3 quart tank. Heavy duty clear/white lye proof, polypropylene plastic. The weakess link in any HHO cell System is the leaking tanks. We now Spin welded 1/4" NPT female fittings that do not leak! Add a straight hose fitting or a elbow, that you can turn to any direction.

Design your Own Tank!

The water/bubbler tanks are the weakness link in a HHO Cell System. NOT GOOD. We add spin/melt 1/4" NPT female fittings onto the tank in any location. We have 5 standard hose fitting connections, but if you have a special tank configuration not listed below?, just contact us and we will make a tank just for your needs.

Two choices of the CAP 1) EPA approved, 3 click, prefect seal CAP ($3.00 more) or 2) the Standard CAP, with the you feel seal.

You can choose below the hose fitting locations on the tank. Each 1/4" NPT threaded fitting allows either a straight or elbow fitting, in any direction you wish.

Choice of 1/4" or 3/8" hose fitting and a choice of either a straight nipple or an elbow fitting, either 1/4" or 3/8" hose fitting. (facing tank decal)

GAS IN side fitting comes with a 1/4" or 3/8" elbow fitting. 1.5" from the bottom on the side of the tank, Right or Left side ( facing decal) or GAS IN on the top of tank. (right or left)

GAS OUT TO fitting comes with a 1/4" or 3/8" elbow fitting. 1.5" from the bottom on the side of the tank, choose Right or Left side (facing decal)

Bottom tank fitting in the center bottom of the tank. Choose either 1/4" straight or elbow or 3/8" straight fitting or elbow fitting.

Also sold with 9' of clear flexible poly hose and 6 hose nylon hose clamps.

Comes with lye proof teflon tape. and with 3 fittings, that you will choose below.

1.5 Quart Tank size = 3.5" x 5.5", 6" tall, 2 mount holes
1.5 Quart Skinny Tank size = 2.5" narrow x 9.25" tall, 7.5" wide, 3 mount holes
2 Quart Tank size = 4" x 6.5", 5" tall, 4 mount holes
3 Quart Tank size = 4" x 6.5", 7.25" tall, 6 mount holes
1 Gallon low profile Tank size = 4" x 6.5", 7.25" tall, 6 mount holes


Please Choose:











Add to Cart:



This product was added to our catalog on Saturday 13 February, 2016.

Copyright © 2017 Hydrogen Garage. Powered by Zen Cart
warobbo template